ComAp Modbus register maps

Updated 16 October 2026

1 ComAp model, 10 registers in all, each re-typed from ComAp’s own free documentation and checked against it.

1 of 1 shown

Generator controller
ComAp InteliGen4 200
InteliGen4 200 with firmware 2.2.0: the fixed (reserved) registers only; measurement registers depend on the configuration.
10 registers · 7 writable · RTU/TCP
Also known as: InteliGen 4 200, IG4 200

ComAp: default communication settings

Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).

Model	Transport	Unit ID	Serial	Word order	Documented addressing	Registers
InteliGen4 200	RTU/TCP	1	9600 baud, 8N1	ABCD	0-based	10

ComAp Modbus register maps

ComAp InteliGen4 200

ComAp: default communication settings