Manufacturer

LS Electric Modbus register maps

Updated 25 October 2026

1 LS Electric model, 48 registers in all, each re-typed from LS Electric’s own free documentation and checked against it.

1 of 1 shown

Variable frequency drive
LS Electric LSLV-S100 AC drive (built-in RS-485 Modbus RTU)
LS Electric S100 drives (0.4-75 kW, including IP66) using the built-in RS-485 terminals S+/S-/SG with CM.02 = Modbus-RTU, per S100 User Manual V4.3.
48 registers · 21 writable · RTU
Also known as: LSLV-S100, LSIS S100, LS S100, LSLV0075S100-4EOFNS

LS Electric: default communication settings

Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).

Model	Transport	Unit ID	Serial	Word order	Documented addressing	Registers
LSLV-S100 AC drive (built-in RS-485 Modbus RTU)	RTU	1	9600 baud, 8N1	16-bit only	1-based	48

LS Electric Modbus register maps

LS Electric LSLV-S100 AC drive (built-in RS-485 Modbus RTU)

LS Electric: default communication settings