1. Home
2. Modbus register maps
3. SolarEdge

Manufacturer

SolarEdge Modbus register maps

Updated 16 October 2026

1 SolarEdge model, 77 registers in all, each re-typed from SolarEdge’s own free documentation and checked against it.

• Solar inverter

  SolarEdge SolarEdge inverters (SunSpec logging)

  SolarEdge single-, split- and three-phase inverters with SunSpec enabled (SolarEdge Go/SetApp units, or LCD units on firmware 3.xxxx+); meter 1 at the non-Synergy default base.

  77 registers · 0 writable · RTU/TCP
  Also known as: SE5000, Synergy, SolarEdge SunSpec

SolarEdge: default communication settings

Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).