- Home
- Modbus register maps
- Buderus
Manufacturer
Buderus Modbus register maps
Updated 29 October 2026
2 Buderus models, 159 registers in all, each re-typed from Buderus’s own free documentation and checked against it.
- Boiler / heating system controller
Buderus Logamatic 5000 boiler and system controller (Modbus TCP, datapoint list 4.0)
Buderus Logamatic 5313 and 5311 (and the Bosch Control 8313/8311 equivalents) acting as master, firmware 1.3 or later with the 4.0 datapoint list; addresses for slave controllers differ.
Also known as: Logamatic 5313, Logamatic 5311, Bosch Control 8313, Bosch Control 8311, Control 8000, BCT 531, Logamatic 5000 Modbus - Boiler
Buderus SSB condensing boilers (built-in Modbus RTU)
Buderus SSB series condensing boilers (Bosch Thermotechnology, North America) using the Modbus terminals on the boiler's internal terminal strip, per installation instructions 6720818450 (2015/10).
Also known as: SSB, Buderus SSB boiler, Bosch SSB, 6720818450
Buderus: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| Logamatic 5000 boiler and system controller (Modbus TCP, datapoint list 4.0) | TCP | 255 | - | ABCD | 0-based | 109 |
| SSB condensing boilers (built-in Modbus RTU) | RTU | 1 | 9600 baud, 8N2 | 16-bit only | 0-based | 50 |