- Home
- Modbus register maps
- CO2Meter
Manufacturer
CO2Meter Modbus register maps
Updated 17 November 2026
1 CO2Meter model, 13 registers in all, each re-typed from CO2Meter’s own free documentation and checked against it.
1 of 1 shown
CO2Meter: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| CM500 CO2 sensor / controller (RS-485 Modbus RTU) | RTU | 104 | 19200 baud, 8N1 | 16-bit only | hex 0-based | 13 |