- Home
- Modbus register maps
- Airzone
Manufacturer
Airzone Modbus register maps
Updated 19 November 2026
2 Airzone models, 132 registers in all, each re-typed from Airzone’s own free documentation and checked against it.
- Heat pump Modbus interface
Airzone Aidoo Pro Modbus control for air-to-water heat pumps
Airzone Aidoo Pro units configured for Modbus output and connected to an air-to-water heat pump; register table 'Registers for Air-to-Water HP units' of the Aidoo - Modbus integration manual (v. 201).
Also known as: Aidoo Pro, Aidoo Pro Modbus air-to-water, Airzone Aidoo Modbus aerothermal - VRF / split AC gateway
Airzone Aidoo Pro Modbus control for direct-expansion (split / VRF) air conditioners
Airzone Aidoo Pro units configured for Modbus output and connected to a direct-expansion AC unit; register table 'Registers for Direct Expansion units' of the Aidoo - Modbus integration manual (v. 201). The air-to-water table in the same manual is not covered.
Also known as: Aidoo Pro, Aidoo Pro Modbus, Airzone Aidoo Modbus
Airzone: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| Aidoo Pro Modbus control for air-to-water heat pumps | RTU | 1 | 19200 baud, 8E1 | CDAB | 0-based | 80 |
| Aidoo Pro Modbus control for direct-expansion (split / VRF) air conditioners | RTU | 1 | 19200 baud, 8E1 | CDAB | 0-based | 52 |