- Home
- Modbus register maps
- Autonics
Manufacturer
Autonics Modbus register maps
Updated 17 November 2026
2 Autonics models, 115 registers in all, each re-typed from Autonics’s own free documentation and checked against it.
2 of 2 shown
- Sensor / counter-timer (programmable counter and timer)
Autonics CT series programmable counter / timer (Modbus RTU)
Autonics CT series counters/timers with RS-485 communication, communication manual MCC-CTC1-V1.3-EN.
Also known as: CT4S, CT6, CT6S, CT6M, CT6Y, CT6M-2P, CT6S-1P4 - Sensor / controller (PID temperature controller)
Autonics TK series PID temperature controller (Modbus RTU)
Autonics TK series heating/cooling PID temperature controllers with RS-485, communication manual MCT-TKC1-V2.2-EN.
Also known as: TK4S, TK4M, TK4H, TK4W, TK4L, TK4S-14RR, TK4
Autonics: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| CT series programmable counter / timer (Modbus RTU) | RTU | Not stated | - | CDAB | Modicon | 53 |
| TK series PID temperature controller (Modbus RTU) | RTU | 1 | 9600 baud, 8N2 | 16-bit only | Modicon | 62 |