- Home
- Modbus register maps
- DriSteem
Manufacturer
DriSteem Modbus register maps
Updated 19 November 2026
2 DriSteem models, 243 registers in all, each re-typed from DriSteem’s own free documentation and checked against it.
2 of 2 shown
- Air handler humidifier (steam humidifier controller)
DriSteem Vapor-logic 5 humidifier controller (Modbus RTU)
DriSteem humidifiers with the earlier Vapor-logic version 5 controller, per IOM form VL5-IOM-0914.
Also known as: Vapor-logic version 5, VL5, Vapor-logic5 - Air handler humidifier (steam humidifier controller)
DriSteem Vapor-logic 6 humidifier controller (Modbus RTU)
DriSteem humidifiers and humidification systems controlled by Vapor-logic firmware 6.X.X, per IOM form VL6-IOM-EN-REVH-0225.
Also known as: Vapor-logic, Vapor-logic version 6, VL6, DriSteem GTS, DriSteem XT, DriSteem STS, DriSteem LTS, Vaporstream
DriSteem: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| Vapor-logic 5 humidifier controller (Modbus RTU) | RTU | 99 | 9600 baud | 16-bit only | Modicon | 107 |
| Vapor-logic 6 humidifier controller (Modbus RTU) | RTU | 99 | 9600 baud | 16-bit only | Modicon | 136 |