- Home
- Modbus register maps
- HindlePower
Manufacturer
HindlePower Modbus register maps
Updated 17 November 2026
2 HindlePower models, 147 registers in all, each re-typed from HindlePower’s own free documentation and checked against it.
- Battery charger (industrial float charger, UPS-type DC system)
HindlePower AT10.1 / AT30 series battery charger with communications module (Modbus)
HindlePower AT10.1 and AT30 microprocessor-controlled float battery chargers fitted with the AT Series Communications Module (EJ5037-##) set to Modbus, per operating instructions JA0102-04 Rev. 02-2025.
Also known as: AT10.1, AT30, EJ5037, AT Series Communications Module - Battery charger (industrial float charger, UPS-type DC system)
HindlePower ATevo battery charger (Modbus communications adapter)
HindlePower ATevo battery chargers with the serial or Ethernet communications adapter set to Modbus, per the ATevo Communications online manual version 1.3.
Also known as: ATevo, ATevo Communications
HindlePower: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| AT10.1 / AT30 series battery charger with communications module (Modbus) | RTU/ASCII/TCP | Not stated | 8N1 | 16-bit only | Modicon | 33 |
| ATevo battery charger (Modbus communications adapter) | RTU/TCP | Not stated | - | CDAB | Modicon | 114 |