- Home
- Modbus register maps
- Teledyne Oldham Simtronics
Manufacturer
Teledyne Oldham Simtronics Modbus register maps
Updated 17 November 2026
2 Teledyne Oldham Simtronics models, 32 registers in all, each re-typed from Teledyne Oldham Simtronics’s own free documentation and checked against it.
2 of 2 shown
- Sensor (fixed gas detector)
Teledyne Oldham Simtronics OLCT 700 / OLCT 710 FP catalytic bead combustible gas detector (RS-485 Modbus)
Teledyne Oldham Simtronics OLCT 700 and OLCT 710 FP detectors with 4-20 mA and RS-485 Modbus RTU, manual NP700FPIMEN Revision E.0.
Also known as: OLCT 700 FP, OLCT 710 FP, Oldham OLCT 700 FP, 700 FP series - Sensor (fixed gas detector)
Teledyne Oldham Simtronics OLCT 700 / OLCT 710 IR infrared combustible / CO2 gas detector (RS-485 Modbus)
Teledyne Oldham Simtronics OLCT 700 and OLCT 710 IR detectors with 4-20 mA and RS-485 Modbus RTU, manual NP700IRIMEN Revision E.0.
Also known as: OLCT 700 IR, OLCT 710 IR, Oldham OLCT 700 IR, 700 IR series
Teledyne Oldham Simtronics: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| OLCT 700 / OLCT 710 FP catalytic bead combustible gas detector (RS-485 Modbus) | RTU | 1 | 9600 baud, 8N1 | 16-bit only | 0-based | 16 |
| OLCT 700 / OLCT 710 IR infrared combustible / CO2 gas detector (RS-485 Modbus) | RTU | 1 | 9600 baud, 8N1 | 16-bit only | 0-based | 16 |