Manufacturer
Senva Modbus register maps
Updated 17 November 2026
2 Senva models, 162 registers in all, each re-typed from Senva’s own free documentation and checked against it.
2 of 2 shown
- Energy meter
Senva EM-RS485 networked energy meter (Modbus RTU/ASCII)
Senva EM-RS485 three-phase energy meters with Senva CVT sensors, firmware v1.1.2, Modbus Protocol Guide 154-0023-0B (2017-04-10).
Also known as: EM-RS485, Senva EM-RS485, Senva protocol energy meter - Sensor (gas detector)
Senva TG series toxic/combustible gas monitor (RS-485 Modbus)
Senva TG series RS-485 gas monitors (one or two gas sensors, optional temperature), Modbus Protocol Guide 154-0036-0A (2020-02-07).
Also known as: Senva TG, TG series
Senva: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| EM-RS485 networked energy meter (Modbus RTU/ASCII) | RTU/ASCII | Not stated | - | ABCD | 0-based | 83 |
| TG series toxic/combustible gas monitor (RS-485 Modbus) | RTU/ASCII | Not stated | - | ABCD | 0-based | 79 |