- Home
- Modbus register maps
- Teledyne Analytical Instruments
Manufacturer
Teledyne Analytical Instruments Modbus register maps
Updated 17 November 2026
2 Teledyne Analytical Instruments models, 62 registers in all, each re-typed from Teledyne Analytical Instruments’s own free documentation and checked against it.
- Sensor (infrared gas analyzer)
Teledyne Analytical Instruments 7500 / 7600 infrared gas analyzer (Modbus RTU)
Teledyne 7500 and 7600 infrared gas analyzers with the Modbus communication function; channel registers CH1-CH8 apply to both models, CH9-CH12 to the 7600 only.
Also known as: Teledyne 7500, Teledyne 7600, Model 7500, Model 7600 - Sensor (flame detector)
Teledyne Gas and Flame Detection Spyglass SG50-F flame detector (Modbus RTU)
Teledyne Spyglass SG50-F optical flame detectors (IR3, UV-IR, IR3-H2 and HD video variants) with RS-485 Modbus RTU, communication manual SG50FMODBUS-EN rev 1.0.
Also known as: SG50-F, Spyglass SG50-F, IR3-HD, UV-IR, IR3, UV-IR-HD, IR3-H2-HD, IR3-H2, UV-IR-F, UV-IR-F-HD
Teledyne Analytical Instruments: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| 7500 / 7600 infrared gas analyzer (Modbus RTU) | RTU | Not stated | 9600 baud, 8N1 | 16-bit only | Modicon | 43 |
| Spyglass SG50-F flame detector (Modbus RTU) | RTU | Not stated | 9600 baud, 8N1 | 16-bit only | hex 0-based | 19 |