- Home
- Modbus register maps
- Cummins
Manufacturer
Cummins Modbus register maps
Updated 19 November 2026
3 Cummins models, 425 registers in all, each re-typed from Cummins’s own free documentation and checked against it.
- Generator controller (paralleling master control)
Cummins MCM3320 master control module (Modbus RTU)
Cummins MCM3320 master control modules on their RS-485 Modbus RTU port, per section 10 of A029X159 Issue 7.
Also known as: MCM3320, MCM 3320, PowerCommand MCM3320 - Generator controller
Cummins PCC 1301 / PowerCommand 1.1 / 1.2 genset control (Modbus RTU)
Cummins PCC 1301 and PowerCommand 1.1/1.2 generator set controls on their RS-485 Modbus RTU port, per section 1 of A029X159 Issue 7.
Also known as: PCC 1301, PCC1301, PowerCommand 1.1, PowerCommand 1.2, PC1.1, PC1.2 - Generator controller
Cummins PowerCommand 2.2 / 2.3 / 3.3 genset control (Modbus RTU)
Cummins PowerCommand 2.x and 3.x generator set controls (PC 2.2, 2.3, 3.3), per section 2 of A029X159 Issue 7; registers marked PC 3.x only are absent on PC 2.x.
Also known as: PowerCommand 2.2, PowerCommand 2.3, PowerCommand 3.3, PC2.2, PC2.3, PC3.3
Cummins: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| MCM3320 master control module (Modbus RTU) | RTU | 1 | 19200 baud, 8E1 | ABCD | Modicon | 224 |
| PCC 1301 / PowerCommand 1.1 / 1.2 genset control (Modbus RTU) | RTU | Not stated | - | 16-bit only | Modicon | 49 |
| PowerCommand 2.2 / 2.3 / 3.3 genset control (Modbus RTU) | RTU | Not stated | - | ABCD | Modicon | 152 |