- Home
- Modbus register maps
- Fuji Electric
Manufacturer
Fuji Electric Modbus register maps
Updated 19 November 2026
3 Fuji Electric models, 191 registers in all, each re-typed from Fuji Electric’s own free documentation and checked against it.
- Variable frequency drive (HVAC / pump)
Fuji Electric FRENIC-HVAC / FRENIC-AQUA inverters (RS-485 Modbus RTU)
Fuji Electric FRENIC-HVAC (AR) and FRENIC-AQUA (AQ) inverters on the RS-485 port in Modbus RTU mode (y10 = 0); RS-485 Communication User's Manual 24A7-E-0021b.
Also known as: FRENIC-HVAC, FRENIC-AQUA, FRN-AR, FRN-AQ - Sensor (digital process controller)
Fuji Electric PXH digital controller (Modbus RTU, monitoring map)
Fuji Electric PXH digital controllers on the RS-485 Modbus port; read-only monitoring registers from manual INP-TN514207c-E.
Also known as: PXH - Sensor (digital temperature controller)
Fuji Electric PXR micro controller X (RS-485 Modbus option)
Fuji Electric PXR series controllers with the RS-485 Modbus communication option; manual INP-TN512642d-E.
Also known as: PXR3, PXR4, PXR5, PXR9
Fuji Electric: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| FRENIC-HVAC / FRENIC-AQUA inverters (RS-485 Modbus RTU) | RTU | Not stated | - | 16-bit only | parameter-derived | 53 |
| PXH digital controller (Modbus RTU, monitoring map) | RTU | 1 | 38400 baud, 8O1 | CDAB | Modicon | 35 |
| PXR micro controller X (RS-485 Modbus option) | RTU | 1 | 9600 baud, 8O1 | 16-bit only | Modicon | 103 |