- Home
- Modbus register maps
- Honeywell
Manufacturer
Honeywell Modbus register maps
Updated 17 November 2026
3 Honeywell models, 170 registers in all, each re-typed from Honeywell’s own free documentation and checked against it.
- Sensor (extractive gas detector)
Honeywell Midas gas detector (Modbus/TCP)
Honeywell Midas extractive gas detectors (original Midas platform, software V1.08), user manual 3010M5000 revision 32, Appendix A Modbus/TCP interface.
Also known as: Midas, MIDAS gas detector - Sensor (extractive gas detector)
Honeywell Midas S2 extractive gas transmitter (Modbus/TCP)
Honeywell Midas S2 single-point extractive gas transmitters with Ethernet/PoE, user manual 3023M5001 Rev A, Modbus/TCP register map (Table 6-1).
Also known as: Midas S2, MIDAS-S2, Midas S2 gas detector - Boiler controller
Honeywell SOLA hydronic boiler control (Modbus interface)
Honeywell SOLA (R7910/R7911) integrated boiler controls, status registers 0-173 of the SOLA Modbus Interface specification Rev 4.1.1 (2013-10-14). Used inside many OEM condensing boilers.
Also known as: R7910, R7911, Honeywell SOLA, SOLA ICP
Honeywell: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| Midas gas detector (Modbus/TCP) | TCP | Not stated | - | 16-bit only | Modicon | 16 |
| Midas S2 extractive gas transmitter (Modbus/TCP) | TCP | Not stated | - | 16-bit only | Modicon | 14 |
| SOLA hydronic boiler control (Modbus interface) | RTU | Not stated | 38400 baud, 8N1 | 16-bit only | 0-based | 140 |