Manufacturer
VTS Modbus register maps
Updated 17 November 2026
3 VTS models, 66 registers in all, each re-typed from VTS’s own free documentation and checked against it.
3 of 3 shown
- Sensor
VTS CO2-SENS-D-MODRTU
VTS CO2-SENS-D-MODRTU duct CO2 transducer (MH-Z19B sensing module), manual ver. 2.0 (11.2021).
Also known as: CO2 transducer CO2-SENS-D-MODRTU, VTS duct CO2 sensor - Thermostat (fan heater controller)
VTS HMI-VOLCANO EC controller for VOLCANO air heaters
VTS HMI-VOLCANO EC wall controller with Modbus RTU, device integration manual version 1.1.
Also known as: HMI VOLCANO EC, VOLCANO EC controller - Sensor
VTS RH+T-SENS-D-MODRTU humidity and temperature transducer
VTS RH+T-SENS-D-MODRTU duct humidity and temperature transducer (Sensirion SHT31-DIS-B), manual ver. 2.0 (11.2021).
Also known as: RH&T-SENS-D-MODRTU, VTS duct humidity sensor
VTS: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| CO2-SENS-D-MODRTU | RTU | 1 | 19200 baud, 8N1 | 16-bit only | hex 0-based | 8 |
| HMI-VOLCANO EC controller for VOLCANO air heaters | RTU | 1 | 9600 baud, 8E1 | 16-bit only | 0-based | 49 |
| RH+T-SENS-D-MODRTU humidity and temperature transducer | RTU | 1 | 19200 baud, 8N1 | 16-bit only | hex 0-based | 9 |