Easy Modbus
  1. Home
  2. Modbus register maps
  3. Teledyne Detcon

Manufacturer

Teledyne Detcon Modbus register maps

Updated 17 November 2026

8 Teledyne Detcon models, 172 registers in all, each re-typed from Teledyne Detcon’s own free documentation and checked against it.

8 of 8 shown

Teledyne Detcon: default communication settings

Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).

ModelTransportUnit IDSerialWord orderDocumented addressingRegisters
Model CX-IR infrared combustible gas sensor (Modbus RTU)RTU19600 baud, 8N116-bit only0-based16
Model DM-700 electrochemical toxic gas / oxygen sensor (RS-485 Modbus)RTU19600 baud, 8N116-bit only0-based16
Model FP-624D MicroSafe combustible gas sensor (RS-485 Modbus)RTU19600 baud, 8N116-bit only0-based13
Model FP-700 catalytic bead combustible gas sensor (RS-485 Modbus)RTU19600 baud, 8N116-bit only0-based16
Model IR-700 infrared combustible / CO2 gas sensor (RS-485 Modbus)RTU19600 baud, 8N116-bit only0-based16
Model PI-700 photoionization (PID) VOC sensor (RS-485 Modbus)RTU19600 baud, 8N116-bit only0-based16
Model TP-700 MOS (metal oxide) H2S sensor (RS-485 Modbus)RTU19600 baud, 8N116-bit only0-based15
Model X40 integrated alarm and control system (Modbus slave port)RTUNot stated9600 baud, 8N116-bit only0-based64