- Home
- Modbus register maps
- Endress+Hauser
Manufacturer
Endress+Hauser Modbus register maps
Updated 19 November 2026
6 Endress+Hauser models, 454 registers in all, each re-typed from Endress+Hauser’s own free documentation and checked against it.
- Sensor (water analysis transmitter)
Endress+Hauser Liquiline CM44x multichannel transmitter (Modbus RS485 / TCP)
Liquiline CM44x with the Modbus RS485 or Modbus TCP option, software 1.11.00 and later (SD01189C/07/EN/07.22). The CSFxx sampler and CA80xx analyzer blocks of the same guide are not included.
Also known as: CM442, CM444, CM448, CM44P, CM44R, Liquiline CM442, Liquiline CM444, Liquiline CM448 - Sensor (electromagnetic flowmeter)
Endress+Hauser Proline Promag 300 electromagnetic flowmeter (Modbus RS485)
Promag 300 with the Modbus RS485 communication option, parameter description GP01053D/06/EN/04.22.
Also known as: Promag 300, Promag P 300, Promag H 300, Promag W 300 - Sensor (electromagnetic flowmeter)
Endress+Hauser Proline Promag 400 electromagnetic flowmeter (Modbus RS485)
Proline Promag 400 transmitters with the Modbus RS485 output, as described in GP01045D/06/EN/02.21.
Also known as: Promag D 400, Promag L 400, Promag W 400, Proline 400 Modbus RS485 - Sensor (ultrasonic gas flowmeter)
Endress+Hauser Proline Prosonic Flow G 300 ultrasonic gas flowmeter (Modbus RS485)
Prosonic Flow G 300 with the Modbus RS485 communication option, parameter description GP01131D/06/EN/02.24-00.
Also known as: Prosonic Flow G 300 - Sensor (ultrasonic gas flowmeter)
Endress+Hauser Proline Prosonic Flow G 500 ultrasonic gas flowmeter (Modbus RS485)
Prosonic Flow G 500 with the Modbus RS485 communication option, parameter description GP01133D/06/EN/02.24-00.
Also known as: Prosonic Flow G 500 - Sensor (clamp-on ultrasonic flowmeter)
Endress+Hauser Proline Prosonic Flow W 400 ultrasonic flowmeter (Modbus RS485)
Proline Prosonic Flow W 400 clamp-on flowmeter with the Modbus RS485 output, as described in GP01207D/06/EN/01.24.
Also known as: Prosonic Flow W 400
Endress+Hauser: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| Liquiline CM44x multichannel transmitter (Modbus RS485 / TCP) | RTU/ASCII/TCP | 247 | 19200 baud, 8E1 | CDAB | 0-based | 221 |
| Proline Promag 300 electromagnetic flowmeter (Modbus RS485) | RTU/ASCII | 247 | 19200 baud, 8E1 | CDAB | 1-based | 32 |
| Proline Promag 400 electromagnetic flowmeter (Modbus RS485) | RTU/ASCII | 247 | 19200 baud, 8E1 | CDAB | 1-based | 53 |
| Proline Prosonic Flow G 300 ultrasonic gas flowmeter (Modbus RS485) | RTU/ASCII | 247 | 19200 baud, 8E1 | CDAB | 1-based | 44 |
| Proline Prosonic Flow G 500 ultrasonic gas flowmeter (Modbus RS485) | RTU/ASCII | 247 | 19200 baud, 8E1 | CDAB | 1-based | 44 |
| Proline Prosonic Flow W 400 ultrasonic flowmeter (Modbus RS485) | RTU/ASCII | 247 | 19200 baud, 8E1 | CDAB | 1-based | 60 |