Manufacturer
Lenze Modbus register maps
Updated 17 November 2026
5 Lenze models, 100 registers in all, each re-typed from Lenze’s own free documentation and checked against it.
- Variable frequency drive
Lenze i510 cabinet inverter 0.25-2.2 kW (Modbus RTU)
Lenze i510 cabinet inverters 0.25-2.2 kW with the Modbus/CANopen control unit, selector set to Modbus, firmware 01.01.01.00 as documented in the commissioning manual.
Also known as: i500 series, i510 Cabinet, I51AE - Variable frequency drive
Lenze MC Series drives MC1000 / MC3000 (Modbus RTU)
Lenze AC Tech MC1000 and MC3000 Series drives, software 213-083 rev 13 (parameter configurations 188-190); reference guide RG-MCMOD.
Also known as: MC1000, MC3000, MC Series, Lenze AC Tech MC, RG-MCMOD - Variable frequency drive
Lenze MCH Series HVAC drive (Modbus RTU)
Lenze AC Tech MCH Series drives, software 213-070 rev 00 (parameter configuration 148); reference guide RG-MHMOD.
Also known as: MCH, Lenze AC Tech MCH, RG-MHMOD - Variable frequency drive
Lenze SCF Series drive with Modbus module (basic network control)
Lenze AC Tech SCF Series drives with the optional Modbus RTU communication module; application note AN0028/A1 (January 2008).
Also known as: SCF, Lenze AC Tech SCF, AN0028 - Variable frequency drive
Lenze SMVector drive with ESVZAR0 RS-485 Modbus module
Lenze AC Tech SMVector drives up to 10 HP with the ESVZAR0 RS-485 Modbus module, module software 1.01 / 1.10 / 1.30 (guide CMVMB401C).
Also known as: SMVector, SMV, ESVZAR0, Lenze AC Tech SMV, CMVMB401C
Lenze: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| i510 cabinet inverter 0.25-2.2 kW (Modbus RTU) | RTU | 1 | - | ABCD | Modicon | 17 |
| MC Series drives MC1000 / MC3000 (Modbus RTU) | RTU | Not stated | 9600 baud, 8N2 | 16-bit only | parameter-derived | 20 |
| MCH Series HVAC drive (Modbus RTU) | RTU | Not stated | 9600 baud, 8N2 | 16-bit only | parameter-derived | 24 |
| SCF Series drive with Modbus module (basic network control) | RTU | Not stated | 9600 baud | 16-bit only | Modicon | 6 |
| SMVector drive with ESVZAR0 RS-485 Modbus module | RTU | 1 | 9600 baud, 8N2 | CDAB | parameter-derived | 33 |