Manufacturer
DEIF Modbus register maps
Updated 19 November 2026
8 DEIF models, 1,037 registers in all, each re-typed from DEIF’s own free documentation and checked against it.
- Generator controller
DEIF AGC 150 Generator controller
AGC 150 software 1.39.0 (Modbus server tables revision Z), GEN (genset) controller type. The iE 150 Land tables 4189341430 rev. H for the same software match these tables apart from the product name.
Also known as: AGC 150 GEN, AGC 150 Generator, iE 150 Land, iE 150 GEN - Generator controller
DEIF AGC 150 Generator Marine controller
AGC 150 Marine software 1.39.0 (marine Modbus server tables revision E), GEN-M (marine genset) controller type. The iE 150 Marine tables 4189341431 rev. H match these tables.
Also known as: AGC 150 GEN-M, AGC 150 Generator Marine, iE 150 Marine - Generator controller
DEIF AGC 200 Advanced Genset Controller
AGC 200 series software 4.68.2.x, genset (DG) application only.
Also known as: AGC 222, AGC 242, AGC 243, AGC 244, AGC 245, AGC 246, AGC-200 - Generator controller
DEIF AGC-4 Automatic Genset Controller
AGC-4 software 4.83.0 (Modbus tables revision I), genset (DG) application; mains and BTB variants share many addresses but are not covered.
Also known as: AGC-4 DG, AGC 4, Multi-line 2 AGC-4 - Generator controller
DEIF AGC-4 Mk II Automatic Genset Controller
AGC-4 Mk II software 6.31.0 (Modbus tables revision N), genset (GEN) application only.
Also known as: AGC-4 Mk2, AGC-4 MkII - Generator controller
DEIF SGC 120 / SGC 121 Single Genset Controller
SGC 120 and SGC 121 (first generation, not Mk II); the SGC 120 user manual 4189341340B covers application software 9.04.
Also known as: SGC 120, SGC 121, SGC120, SGC121 - Generator controller
DEIF SGC 120 Mk II Single Genset Controller
SGC 120 Mk II software R18.0 (Modbus tables revision C).
Also known as: SGC 120 MkII, SGC 120 Mk2 - Generator controller
DEIF SGC 420 Mk II Single Genset Controller
SGC 420 Mk II software R19.0 (Modbus tables revision C).
Also known as: SGC 420 MkII, SGC 420 Mk2
DEIF: default communication settings
Factory defaults as the manufacturer documents them. Change one setting at a time on site and write down what you changed. Word order applies to 32-bit values; the addressing column says how the manufacturer prints register numbers (every map on this site also gives the 0-based wire address).
| Model | Transport | Unit ID | Serial | Word order | Documented addressing | Registers |
|---|---|---|---|---|---|---|
| AGC 150 Generator controller | RTU/TCP | 3 | 9600 baud | ABCD | 0-based | 197 |
| AGC 150 Generator Marine controller | RTU/TCP | 3 | 9600 baud | ABCD | 0-based | 164 |
| AGC 200 Advanced Genset Controller | RTU | Not stated | 8N1 | ABCD | 0-based | 159 |
| AGC-4 Automatic Genset Controller | RTU/TCP | Not stated | 8N1 | ABCD | 0-based | 159 |
| AGC-4 Mk II Automatic Genset Controller | RTU/TCP | Not stated | 8N1 | ABCD | 0-based | 184 |
| SGC 120 / SGC 121 Single Genset Controller | RTU | Not stated | 8N1 | 16-bit only | 0-based | 66 |
| SGC 120 Mk II Single Genset Controller | RTU | Not stated | - | 16-bit only | 0-based | 53 |
| SGC 420 Mk II Single Genset Controller | RTU | Not stated | - | 16-bit only | 0-based | 55 |